DL/T 474.4-2006 现场绝缘试验实施导则 第4部分:交流耐压试验

作者:标准资料网 时间:2024-05-25 13:56:53   浏览:8688   来源:标准资料网
下载地址: 点击此处下载
基本信息
标准名称:现场绝缘试验实施导则 第4部分:交流耐压试验
英文名称:Guide for insulation test on site AC voltage withstanding test
中标分类: 电工 >> 电工综合 >> 基础标准与通用方法
ICS分类: 电气工程 >> 绝缘
替代情况:替代DL/T 474.4-1992
发布部门:国家发展和改革委员会
发布日期:2006-05-06
实施日期:2006-10-01
首发日期:
作废日期:
主管部门:国家发展和改革委员会
提出单位:中国电力企业联合会
归口单位:电力行业高压试验技术标准化技术委员会
起草单位:华北电力科学研究院有限责任公司
起草人:邓春、刘宝成
出版社:中国电力出版社
出版日期:2006-10-01
页数:14页
适用范围

本标准提出了高电压电气设备交流耐压试验所涉及的试验接线、试验设备、试验方法和注意事项等一些技术细则。
本标准适用于在发电厂、变电所现场和修理车间、试验室等条件下对高电压电气设备进行交流耐压试验。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB 1094.3-2003电力变压器第3部分:绝缘水平、绝缘试验和外绝缘空气间隙(modI EC 60076-3:2000)
GB/T 1 6 927.2-1997 高电压试验技术第二部分:测量系统
DL/T 5 9 6-1996 电力设备预防性试验规程
DL/T 1 0 15 现场直流和交流耐压试验电压测量系统的使用导则

所属分类: 电工 电工综合 基础标准与通用方法 电气工程 绝缘
下载地址: 点击此处下载
【英文标准名称】:Industrialtypeflooring,walkwaysandstairtreads-Specificationforexpandedmetalgratingpanels
【原文标准名称】:工业型金属地板覆盖物、走道和楼梯.扩展式金属格栅板规范
【标准号】:BS4592-2-1987
【标准状态】:作废
【国别】:英国
【发布日期】:1987-07-31
【实施或试行日期】:1987-07-31
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:固定;栅格;踏步(楼梯);钢;尺寸;尺寸;网状金属材料;露天楼梯;结构设计;过道(建筑物);挠曲试验;负荷;楼梯;板条;踏步平板;作标记;结构钢;装配;薄板材;铝合金;工业设施;楼板
【英文主题词】:Aluminiumalloys;Deflectiontests;Dimensions;Expandedmetal;Fixing;Floors;Gangways(buildings);Grilles;Industrialfacilities;Installation;Loading;Marking;Openstairways;Panels;Sheetmaterials;Size;Stairs;Steels;Steps(stairs);Structuraldesign;Structuralsteels;Treads(stairs)
【摘要】:Materials,sizes,performancecriteria,marking.Appendicesgivemethodsoftest,informationtobegiveninanenquiryororderandrecommendationsforinstallation.
【中国标准分类号】:Q73
【国际标准分类号】:91_060_30
【页数】:16P.;A4
【正文语种】:英语


Product Code:SAE J2534/2
Title:Optional Pass-Thru Features
Issuing Committee:Vehicle E E System Diagnostic Standards Committee
Scope:SAE J2534-1 defines a standard vehicle network interface that can be used to reprogram emission-related control modules. However, there is a need to support vehicles prior to the 2004 model year as well as non-emission related control modules. The SAE J2534-2 document meets these needs by detailing extensions to an SAE J2534-1 interface. Together, these extensions provide the framework for a common interface to protect the software investment of the Vehicle OEMs and Scan Tool manufacturers. Only the optional features will be described by this document. Unless otherwise noted it is expected that these features are added to a fully compliant interface adhering to the December 2004 publication of SAE J2534-1.